F a n l e s s P a n e l P C s
CMOS Clear for External RTC (J5)
Warning! To avoid damaging the computer, always turn off the
This jumper is used to erase CMOS data and reset system BIOS information.
The procedure for clearing CMOS is:
1.
Turn off system.
2.
Short pin 2 and pin 3.
3.
Return jumper to pins 1 and 2.
4.
Turn on the system. The BIOS is now reset to its default setting.
Table 4.3: CMOS clear (J5)
*Normal operation
* default setting
PC-3200 Series User Manual V1.2
power supply before setting "Clear CMOS". Set the
jumper back to "Normal operation" before turning on
the power supply.
P C - 3 2 0 0
Clear CMOS
41