Aaeon AHP-1123 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Touch Panel
  5. AHP-1123
  6. Manual

Aaeon AHP-1123 Manual

Touch panel pc onboard intel atom d2550 1.86 ghz processor touch panel pc with 12.1” tft lcd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T o u c h P a n e l P C
A H P - 1 1 2 3
AHP-1123
®
Onboard Intel
Atom™ D2550
1.86 GHz Processor
Touch Panel PC
With 12.1" TFT LCD
nd
AHP-1123 Manual 2
Ed.
May 11, 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AHP-1123 and is the answer not in the manual?

Questions and answers

Related Manuals for Aaeon AHP-1123

Summary of Contents for Aaeon AHP-1123

  • Page 1 T o u c h P a n e l P C A H P - 1 1 2 3 AHP-1123 ® Onboard Intel Atom™ D2550 1.86 GHz Processor Touch Panel PC With 12.1” TFT LCD AHP-1123 Manual 2 May 11, 2015...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 T o u c h P a n e l P C A H P - 1 1 2 3 Acknowledgments All other products’ name or trademarks are properties of their respective owners. • AMI is a trademark of American Megatrends Inc. •...
  • Page 4 A H P - 1 1 2 3 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed:  AHP-1123 Touch Panel PC  Mounting brackets and screws  DVD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
  • Page 5 T o u c h P a n e l P C A H P - 1 1 2 3 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
  • Page 6 T o u c h P a n e l P C A H P - 1 1 2 3 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged. The equipment has obvious signs of breakage.
  • Page 7 T o u c h P a n e l P C A H P - 1 1 2 3 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb)

  • Page 8: Table Of Contents

    T o u c h P a n e l P C A H P - 1 1 2 3 Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 Specification .............. 1-4 1.4 Dimension ..............1-7 Chapter 2 Hardware Installation 2.1 Panelmount Installation ..........
  • Page 9 T o u c h P a n e l P C A H P - 1 1 2 3 B.4 DMA Channel Assignments ......... B-6 Appendix C AHCI Setting C.1 Setting AHCI ............C-2 viii...

  • Page 10: Chapter 1 General Information

    T o u c h P a n e l P C A H P - 1 1 2 3 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 11: Introduction

    (HMI). It is a PC-based system with 12.1" color TFT LCD display, onboard Ethernet controller, multi-COM port interfaces and an audio controller. With a built-in CFast™ socket, the AHP-1123 is as compact and user friendly as a multi-function computer. In addition, its "fit anywhere"...

  • Page 12: Features

    T o u c h P a n e l P C A H P - 1 1 2 3 1.2 Features  12.1” 500 Nits XGA TFT LED LCD ®  Onboard Intel Atom™ D2550 1.86GHz  Fanless Operation ...

  • Page 13: Specification

    T o u c h P a n e l P C A H P - 1 1 2 3 1.3 Specification System ®  Onboard Intel Atom™ D2550 1.86 GHz Processor  System Memory DDR3 800/1066 SODIMM x 1, up to 4GB (Default is 2 GB) ...
  • Page 14 T o u c h P a n e l P C A H P - 1 1 2 3  Mounting Panel/ VESA 100  Dimension 12.5"(W) x 9.6"(H) x 2.5"(D) (317mm x 243mm x 63.5mm)  Carton Dimension 16.6"(W) x 15.9"(H) x 7.7"(D) (422mm x 404mm x 196mm) ...
  • Page 15 T o u c h P a n e l P C A H P - 1 1 2 3  Backlight  Backlight MTBF (Hours) 50,000 Touch Screen  Type 5-wire analog resistive  Resolution 2048x2048  Light Transmission >...

  • Page 16: Dimension

    T o u c h P a n e l P C A H P - 1 1 2 3 1.4 Dimension Chapter 1 General Information...

  • Page 17: Chapter 2 Hardware Installation

    T o u c h P a n e l P C A H P - 1 1 2 3 Chapter Hardware Installation Chapter 2 Quick Installation Guide...

  • Page 18: Panelmount Installation

    T o u c h P a n e l P C A H P - 1 1 2 3 2.1 Panelmount Installation The display panel can be mounted into the wall. You will need the screws along with the mounting brackets, which be packed in the accessory box.
  • Page 19 T o u c h P a n e l P C A H P - 1 1 2 3 2.2 COM1/2/3 RS-232/422/485 Serial Port Connector COM1/COM3 RS-232 (D-sub 9 male) S ignal S ignal COM2 RS-232/422/485 (D-sub 9 male) Signal Signal RXD (422RXD+)

  • Page 20: Hard Disk Drive Installation

    T o u c h P a n e l P C A H P - 1 1 2 3 2.3 Hard Disk Drive Installation Step 1: Unfasten the screws of the heatsink Step 2: Get the Bracket of Hard Disk Drive from the package 2 - 4 Chapter 2 Quick Installation Guide...
  • Page 21 T o u c h P a n e l P C A H P - 1 1 2 3 Step 3: Fasten the Hard Disk onto the bracket 2 - 5 Chapter 2 Quick Installation Guide...
  • Page 22 T o u c h P a n e l P C A H P - 1 1 2 3 Step 4: Fasten the screws of the hard disk bracket onto the AHP-1123 2 - 6 Chapter 2 Quick Installation Guide...
  • Page 23 T o u c h P a n e l P C A H P - 1 1 2 3 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 24: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The AHP-1123 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 25: Ami Bios Setup

    T o u c h P a n e l P C A H P - 1 1 2 3 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 26 T o u c h P a n e l P C A H P - 1 1 2 3 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
  • Page 27 T o u c h P a n e l P C A H P - 1 1 2 3 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters CPU Configuration CPU Configuration Parameters SATA Configuration SATA Device Options Settings USB Configuration USB Configuration Parameters Super IO Configuration...
  • Page 28 T o u c h P a n e l P C A H P - 1 1 2 3 System Super IO Chip Parameters H/W Monitor Monitor hardware status Chapter 3 AMI BIOS Setup 3-6...
  • Page 29 T o u c h P a n e l P C A H P - 1 1 2 3 ACPI Settings Options summary: (default setting) Suspend Disabled ACPI Sleep State S1 only(CPU Stop Clock) S3 only(Suspend to RAM) Select the ACPI state used for System Suspend Enabled Wake on Ring Disabled...
  • Page 30 T o u c h P a n e l P C A H P - 1 1 2 3 RTC Wake Settings Options summary: (default setting) Wake system with Fixed Disabled Time Enabled Enable or disable System wake on alarm event. Wake up time is setting by following settings.
  • Page 31 T o u c h P a n e l P C A H P - 1 1 2 3 Wake system with Disabled Dynamic Time Enabled Enable or disable System wake on alarm event. Wake up time is current time + Increase minutes.
  • Page 32 T o u c h P a n e l P C A H P - 1 1 2 3 CPU Configuration Options summary: (default setting) Hyper-Threading Disabled Enabled En/Disable CPU Hyper-Threading function Chapter 3 AMI BIOS Setup 3-10...
  • Page 33 T o u c h P a n e l P C A H P - 1 1 2 3 SATA Configuration Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller Configure SATA as AHCI Configure SATA controller operating as IDE/AHCI mode. SATA Port 0/Port 1 Disabled Enabled...
  • Page 34 T o u c h P a n e l P C A H P - 1 1 2 3 SATA Port 0/Port 1 Hot Plug Disabled Enabled En/Disable Hot Plug feature for specified port. Chapter 3 AMI BIOS Setup 3-12...
  • Page 35 T o u c h P a n e l P C A H P - 1 1 2 3 USB Configuration Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
  • Page 36 T o u c h P a n e l P C A H P - 1 1 2 3 Forced FDD Hard Disk CD-ROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive.
  • Page 37 T o u c h P a n e l P C A H P - 1 1 2 3 Super IO Configuration Options summary: (default setting) Serial Port 1/2/3/4 Configuration Set Parameters of Serial Port 1/2/3/4 Restore AC Power Loss Power Off Power On Last State...
  • Page 38 T o u c h P a n e l P C A H P - 1 1 2 3 Serial Port 1 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3F8h; IRQ=4; IO=3F8h;...
  • Page 39 T o u c h P a n e l P C A H P - 1 1 2 3 Select a resource setting for Super IO device. Serial Port 2 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port.
  • Page 40 T o u c h P a n e l P C A H P - 1 1 2 3 IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; Select a resource setting for Super IO device. COM2 Type Select RS232 RS422 RS485 Configure COM2 operated as RS232, RS422 or RS485. Chapter 3 AMI BIOS Setup 3-18...
  • Page 41 T o u c h P a n e l P C A H P - 1 1 2 3 Serial Port 3 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3E8h; IRQ=10; IO=3F8h;...
  • Page 42 T o u c h P a n e l P C A H P - 1 1 2 3 IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; Select a resource setting for Super IO device. Serial Port 4 Configuration Options summary: (default setting) Serial Port Disabled Enabled...
  • Page 43 T o u c h P a n e l P C A H P - 1 1 2 3 IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; Select a resource setting for Super IO device. H/W Monitor Chapter 3 AMI BIOS Setup 3-21...
  • Page 44 T o u c h P a n e l P C A H P - 1 1 2 3 Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters Chapter 3 AMI BIOS Setup 3-22...
  • Page 45 T o u c h P a n e l P C A H P - 1 1 2 3 Host Bridge Options summary: (default setting) Intel IGD Configuration Config Intel IGD Settings. Chapter 3 AMI BIOS Setup 3-23...
  • Page 46 T o u c h P a n e l P C A H P - 1 1 2 3 Intel IGD Configuration Options summary: (default setting) Auto Disable IGD Enabled Disabled Audo disable IGD upon external GFX detected IGFX - Boot Type VBIOS Default LVDS Select Primary boot display device...
  • Page 47 T o u c h P a n e l P C A H P - 1 1 2 3 Adjust backlight brightness. Fixed Graphics Memory 128MB Size 256MB Configure Fixed Graphics Memory Size Chapter 3 AMI BIOS Setup 3-25...
  • Page 48 T o u c h P a n e l P C A H P - 1 1 2 3 South Bridge Options summary: (default setting) Power Mode ATX Type AT Type Select the power type used on the system TPT Devices HD audio and onboard LAN Settings.
  • Page 49 T o u c h P a n e l P C A H P - 1 1 2 3 TPT Devices Options summary: (default setting) R8111E #1 Controller Disabled Enabled Enable or disable PCIE Lan. R8111E #2 Controller Disabled Enabled Enable or disable PCIE Lan.
  • Page 50 T o u c h P a n e l P C A H P - 1 1 2 3 PCI Express Root Port 0/1/2/3 Options summary: (default setting) PCI Express Root Port Disabled 0/1/2/3 Enabled Control the PCI Express Root Port. Chapter 3 AMI BIOS Setup 3-28...
  • Page 51 T o u c h P a n e l P C A H P - 1 1 2 3 Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo. Launch RTL8111E PXE Disabled OpROM Enabled En/Disable PXE boot for RTL8111E LAN Boot Option #X/...
  • Page 52 T o u c h P a n e l P C A H P - 1 1 2 3 BBS Priorities Options summary: (default setting) Boot Option #x Disabled Device name Sets the system boot order Chapter 3 AMI BIOS Setup 3-30...
  • Page 53 T o u c h P a n e l P C A H P - 1 1 2 3 Setup submenu: Security Options summary: (default setting) Administrator Password/ Not set User Password Chapter 3 AMI BIOS Setup 3-31...
  • Page 54 T o u c h P a n e l P C A H P - 1 1 2 3 You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility.
  • Page 55 T o u c h P a n e l P C A H P - 1 1 2 3 Setup submenu: Exit Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.
  • Page 56 T o u c h P a n e l P C A H P - 1 1 2 3 Restore the User Defaults to all the setup options Chapter 3 AMI BIOS Setup 3-34...

  • Page 57: Chapter 4 Driver Installation

    T o u c h P a n e l P C A H P - 1 1 2 3 Chapter D river Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 58 T o u c h P a n e l P C A H P - 1 1 2 3 The AHP-1123 comes with a driver disk that contains all drivers and utilities that can help you setup your product.
  • Page 59 T o u c h P a n e l P C A H P - 1 1 2 3 4.1 Installation Insert the AHP-1123 driver disk into the disk drive. And install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1.
  • Page 60 T o u c h P a n e l P C A H P - 1 1 2 3 Step 4 – Install AHCI Driver (Optional, for SATA in AHCI mode only) Please refer to the Appendix C AHCI Setting Step 5 –...

  • Page 61: Appendix A Programming The Watchdog Timer

    T o u c h P a n e l P C A H P - 1 1 2 3 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 62: Programming

    T o u c h P a n e l P C A H P - 1 1 2 3 A.1 Programming AHP-1123 utilizes the ITE 8783 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 63 T o u c h P a n e l P C A H P - 1 1 2 3 Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
  • Page 64 T o u c h P a n e l P C A H P - 1 1 2 3 Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
  • Page 65 T o u c h P a n e l P C A H P - 1 1 2 3 Watch Dog Timer 1, 2, 3 Configuration Register (Index=72h, 82h, 92h Default=001s0000b) Watch Dog Timer 1,2,3 Time-Out Value (LSB) Register (Index=73h,83h,93h, Default=38h) Watch Dog Timer 1,2,3 Time-Out Value (MSB) Register (Index=74h,84h,94h Default=00h)

  • Page 66: Ite8783 Watchdog Timer Initial Program

    T o u c h P a n e l P C A H P - 1 1 2 3 A.2 ITE8783 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 67 T o u c h P a n e l P C A H P - 1 1 2 3 call Superio_Set_Reg ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h...
  • Page 68 T o u c h P a n e l P C A H P - 1 1 2 3 CALL Write_Configuration_Data Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,81h JNE Not_Initial Need_Initial: Not_Initial:...
  • Page 69 T o u c h P a n e l P C A H P - 1 1 2 3 OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL Write_Configuration_Data ENDP...
  • Page 70 T o u c h P a n e l P C A H P - 1 1 2 3 Set_Logic_Device proc near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main...

  • Page 71: Appendix B I/O Information

    T o u c h P a n e l P C A H P - 1 1 2 3 Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 72: I/O Address Map

    T o u c h P a n e l P C A H P - 1 1 2 3 B.1 I/O Address Map B - 2 Appendix B I/O Information...
  • Page 73 T o u c h P a n e l P C A H P - 1 1 2 3 B - 3 Appendix B I/O Information...

  • Page 74: St Mb Memory Address Map

    T o u c h P a n e l P C A H P - 1 1 2 3 B.2 1 MB Memory Address Map B - 4 Appendix B I/O Information...

  • Page 75: Irq Mapping Chart

    T o u c h P a n e l P C A H P - 1 1 2 3 B.3 IRQ Mapping Chart B - 5 Appendix B I/O Information...
  • Page 76 T o u c h P a n e l P C A H P - 1 1 2 3 B.4 DMA Channel Assignments B - 6 Appendix B I/O Information...
  • Page 77 T o u c h P a n e l P C A H P - 1 1 2 3 Appendix AHCI Setting Appendix C AHCI Setting...
  • Page 78 T o u c h P a n e l P C A H P - 1 1 2 3 C.1 Setting AHCI OS installation to setup AHCI Mode. Step 1: Copy the files below from “Driver CD -> STEP4-AHCI\WIN7_32\F6 Install Floppy Create for 32 and 64 bit Windows”...
  • Page 79 T o u c h P a n e l P C A H P - 1 1 2 3 Step 3: Press “F6” Step 4: Choose “S” Appendix C AHCI Setting...
  • Page 80 T o u c h P a n e l P C A H P - 1 1 2 3 Step 5: Choose “Intel® NM10 Express Chipset” Step 6: It will show the model number you select and then press “ENTER Step 7: Setup is loading files Appendix C AHCI Setting...

Table of Contents