Running The Bios Setup Program - Aaeon PC-3200 User Manual

F a n l e s s P a n e l P C s P C - 3 2 0 0
AC/DC Power adapter DC inlet
Figure 2.5: Connect the power cord to the DC inlet

Running the BIOS Setup Program

Your panel PC is likely to have been properly set up and configured by your dealer
prior to delivery. You may still find it necessary to use the panel PC's BIOS (Basic
Input-Output System) setup program to change system configuration information,
such as the current date and time or your type of hard drive. The setup program is
stored in read-only memory (ROM). It can be accessed either when you turn on or
reset the panel PC, by pressing the "Del" key on your keyboard immediately after
powering on the computer.
The settings you specify with the setup program are recorded in a special area of
memory called CMOS RAM. This memory is backed up by a battery so that it will
not be erased when you turn off or reset the system.
PC-3200 Series User Manual V1.2 23