Aaeon AHP-1083 User Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Touch Panel
  5. AHP-1083
  6. User manual

Aaeon AHP-1083 User Manual

Intel atom d2550 1.86 ghz processor touch panel pc with 8.4” tft lcd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T o u c h P a n e l P C
A H P - 1 0 8 3
AHP-1083
®
Intel
Atom™ D2550
1.86 GHz Processor
Touch Panel PC
With 8.4" TFT LCD
nd
AHP-1083 Manual 2
Ed.
July 2013

Advertisement

Table of Contents
loading

Related Manuals for Aaeon AHP-1083

Summary of Contents for Aaeon AHP-1083

  • Page 1 T o u c h P a n e l P C A H P - 1 0 8 3 AHP-1083 ® Intel Atom™ D2550 1.86 GHz Processor Touch Panel PC With 8.4” TFT LCD AHP-1083 Manual 2 July 2013...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 T o u c h P a n e l P C A H P - 1 0 8 3 Acknowledgments All other products’ name or trademarks are properties of their respective owners.  Award is a trademark of Award Software International, Inc. ...

  • Page 4: Packing List

    A H P - 1 0 8 3 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed:  1 AHP-1083 Touch Panel PC  1 Phoenix Terminal Block  1 Mounting bracket and screws ...
  • Page 5 T o u c h P a n e l P C A H P - 1 0 8 3 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
  • Page 6 T o u c h P a n e l P C A H P - 1 0 8 3 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged. The equipment has obvious signs of breakage.
  • Page 7 T o u c h P a n e l P C A H P - 1 0 8 3 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb)

  • Page 8: Table Of Contents

    T o u c h P a n e l P C A H P - 1 0 8 3 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Specification .............. 1-3 1.3 Dimension ..............1-6 Chapter 2 Hardware Installation 2.1 Panelmount Installation ..........

  • Page 9: Chapter 1 General Information

    T o u c h P a n e l P C A H P - 1 0 8 3 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 10: Introduction

    (HMI). It is a PC-based system with 8.4" color TFT LCD display, onboard Ethernet controller, multi-COM port interfaces and an audio controller. With a built-in CFast socket, the AHP-1083 is as compact and user friendly as a multi-function computer. In addition, its "fit anywhere"...

  • Page 11: Specification

    T o u c h P a n e l P C A H P - 1 0 8 3 1.2 Specification System ®  Onboard Intel Atom™ D2550 1.86 GHz Processor  System Memory 204pin DDRIII 800/1066 SODIMM x 1, Max.
  • Page 12 T o u c h P a n e l P C A H P - 1 0 8 3 Mechanical  Construction Plastic front bezel and aluminum back chassis  Mounting Panel/ VESA  Dimension 16"(W) x 12.2"(H) x 2.67"(D) (407mm x 310.5mm x 67.9mm) ...
  • Page 13 T o u c h P a n e l P C A H P - 1 0 8 3  Display Type 8.4”, SVGA, 450 nits, LED backlight  Max. Resolution 800x600  Max. Colors 262k  Power Consumption 7.44W ...

  • Page 14: Dimension

    T o u c h P a n e l P C A H P - 1 0 8 3 1.3 Dimension AHP-1083 UNITS:mm VESA 75 237.9 67.9 245.0 1- 6 Chapter 1 General Information...

  • Page 15: Chapter 2 Hardware Installation

    T o u c h P a n e l P C A H P - 1 0 8 3 Chapter Hardware Installation Chapter 2 Quick Installation Guide...

  • Page 16: Panelmount Installation

    T o u c h P a n e l P C A H P - 1 0 8 3 2.1 Panelmount Installation The display panel can be mounted into the wall. You will need the screws along with the mounting brackets, which be packed in the accessory box.

  • Page 17: Clear Cmos (Jp2)

    T o u c h P a n e l P C A H P - 1 0 8 3 2.2 Clear CMOS (JP2) Function Normal (Default) Clear CMOS 2.3 COM2 RI/+5V/+12V Selection (JP3) Function +12V RI (Default) Note: Max. Current rating is 0.5A. 2.4 COM Port #2 (CN19) RS-232 Mode Signal...

  • Page 18: Com Port #1 (Cn33)

    T o u c h P a n e l P C A H P - 1 0 8 3 RXD+ TXD+ RXD- N/C / +5 Volt. / (+12 Volt.) Ground RS-485 Mode Signal Signal TXD- TXD+ N/C / +5 Volt. / (+12 Volt.) Ground CRT_PLUG# 2.5 COM Port #1 (CN33)

  • Page 19: Compactflash™ Installation

    T o u c h P a n e l P C A H P - 1 0 8 3 2.6 CompactFlash™ Installation Step 1: Loose the screw of cover to open the CompactFlash™ Slot Step 2: Insert the CompactFlash™ to the CompactFlash™ slot 2 - 5 Chapter 2 Quick Installation Guide...

  • Page 20: Hard Disk Drive Installation

    T o u c h P a n e l P C A H P - 1 0 8 3 2.7 Hard Disk Drive Installation Step 1: Loose the eight M3 screws of the rear cover. Step 2: Loose the three specified M3 screws to get the Hard Disk Drive (HDD) bracket.
  • Page 21 T o u c h P a n e l P C A H P - 1 0 8 3 Step 3: Insert the HDD to the HDD bracket Step 4: Fasten the four screws to fasten the HDD and the HDD bracket 2 - 7 Chapter 2 Quick Installation Guide...
  • Page 22 T o u c h P a n e l P C A H P - 1 0 8 3 Step 5: Connect the SATA cable to the HDD 2 - 8 Chapter 2 Quick Installation Guide...

  • Page 23: Chapter 3 Ami Bios Setup

    T o u c h P a n e l P C A H P - 1 0 8 3 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 24: Setup Menu

    T o u c h P a n e l P C A H P - 1 0 8 3 3.1 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
  • Page 25 T o u c h P a n e l P C A H P - 1 0 8 3 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters S5 RTC Wake Settings Support S5 RTC Wake Function CPU Configuration CPU Configuration Parameters SATA Configuration...

  • Page 26: Acpi Settings

    T o u c h P a n e l P C A H P - 1 0 8 3 USB Configuration Parameters Super IO Configuration IT8783 Super IO Configuration Parameters H/W Monitor Monitor hardware status ACPI Settings Options summary: (default setting) Suspend Disabled ACPI Sleep State S3 (Suspend to RAM)
  • Page 27 T o u c h P a n e l P C A H P - 1 0 8 3 S5 RTC Wake Settings Options summary: (default setting) Wake system with Fixed Disabled Time Enabled Enable or disable System wake on alarm event. Wake up time is setting by following settings.

  • Page 28: Cpu Configuration

    T o u c h P a n e l P C A H P - 1 0 8 3 Wake up minute 0-59 Wake up second 0-59 Wake system with Disabled Dynamic Time Enabled Enable or disable System wake on alarm event. Wake up time is current time + Increase minutes.

  • Page 29: Sata Configuration

    T o u c h P a n e l P C A H P - 1 0 8 3 Options summary: (default setting) Hyper-Threading Disabled Enabled CPU Hyper-Threading Technology support or not SATA Configuration Options summary: (default setting) SATA Controller(s) Enabled Disabled SATA Controller Enable/Disable...

  • Page 30: Usb Configuration

    T o u c h P a n e l P C A H P - 1 0 8 3 AHCI Configure SATA controller operating as IDE/AHCI mode. SATA PORTx Enabled Disabled Enable / Disable SATA Portx SATA Portx Hot Plug Enabled Disabled Enable / Disable SATA Portx Hot Plug function...
  • Page 31 T o u c h P a n e l P C A H P - 1 0 8 3 Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.

  • Page 32: Super Io Configuration

    T o u c h P a n e l P C A H P - 1 0 8 3 Super IO Configuration Options summary: (default setting) Serial Port x Configuration Set Parameters of Serial Port x Restore AC Power Loss Power off Power on Last State...
  • Page 33 T o u c h P a n e l P C A H P - 1 0 8 3 Serial Port 2 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=2F8h; IRQ=3; IO=3F8h;...
  • Page 34 T o u c h P a n e l P C A H P - 1 0 8 3 Select a resource setting for Super IO device. COM2 Type Option RS232 RS422 RS485 Configure COM2 operated as RS232, RS422 or RS485. H/W Monitor Chapter 3 AMI BIOS Setup 3-12...
  • Page 35 T o u c h P a n e l P C A H P - 1 0 8 3 Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters Chapter 3 AMI BIOS Setup 3-13...

  • Page 36: Host Bridge

    T o u c h P a n e l P C A H P - 1 0 8 3 Host Bridge Options summary: (default setting) Intel IGD Configuration Enter to set Graphic Configuration Memory Information Show current memory information Chapter 3 AMI BIOS Setup 3-14...
  • Page 37 T o u c h P a n e l P C A H P - 1 0 8 3 Intel IGD Configuration Options summary: (default setting) Auto Disable IGD Disabled Enabled Auto disable IGD upon external GFX detected. IGFX – Boot Type VBIOS Default LVDS Select the Video Device which will be activated during POST...
  • Page 38 T o u c h P a n e l P C A H P - 1 0 8 3 LVDS1 Backlight Control PWM Inverted PWM Normal Backlight control setting LVDSx Backlight 100% Controller Adjust backlight brightness Control LVDSx Disabled Enabled Dis/Enable LVDSx Fixed Graphics Memory...
  • Page 39 T o u c h P a n e l P C A H P - 1 0 8 3 South Bridge Options summary: (default setting) Power Mode ATX Type AT Type Select AT/ATX Power Mode TPT Devices Configure onboard TPT Devices PCI Express Port x Disabled Enabled...
  • Page 40 T o u c h P a n e l P C A H P - 1 0 8 3 TPT Devices Options summary: (default setting) R8111E #x Controller Disabled Enabld R8111E Enable/Disable Chapter 3 AMI BIOS Setup 3-18...

  • Page 41: Boot Configuration

    T o u c h P a n e l P C A H P - 1 0 8 3 Boot Configuration Options summary: (default setting) Quiet Boot Disabled Enabled Enables or disables Quiet Boot option Launch 8111E PXE Disabled OpROM Enabled En/Disable PXE boot for onboard 8111E LAN...
  • Page 42 T o u c h P a n e l P C A H P - 1 0 8 3 BBS Priorities Options summary: (default setting) Boot Option #x Disabled Device name Sets the system boot order Chapter 3 AMI BIOS Setup 3-20...
  • Page 43 T o u c h P a n e l P C A H P - 1 0 8 3 Setup submenu: Security Options summary: (default setting) Administrator Password/ Not set User Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 44 T o u c h P a n e l P C A H P - 1 0 8 3 required at boot time, or when the user enters the Setup utility. Removing the Password: Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection.
  • Page 45 T o u c h P a n e l P C A H P - 1 0 8 3 HDD Security Options summary: (default setting) Set User Password/ Not set Set Master Password You can install a Master and User password. Before booting to OS, HDD will be set to frozen state.
  • Page 46 T o u c h P a n e l P C A H P - 1 0 8 3 required at boot time, or when the user enters the Setup utility. Removing the Password: Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection.
  • Page 47 T o u c h P a n e l P C A H P - 1 0 8 3 Setup submenu: Exit Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.
  • Page 48 T o u c h P a n e l P C A H P - 1 0 8 3 Restore the User Defaults to all the setup options Chapter 3 AMI BIOS Setup 3-26...

  • Page 49: Chapter 4 Driver Installation

    T o u c h P a n e l P C A H P - 1 0 8 3 Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 50 T o u c h P a n e l P C A H P - 1 0 8 3 The AHP-1083 comes with a CD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 –...
  • Page 51 T o u c h P a n e l P C A H P - 1 0 8 3 4.1 Installation: Insert the AHP-1083 CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1.
  • Page 52  Select the configuration  Follow the instructions that the window shows  The system will help you install the driver automatically Due to AHP-1083 resolution is 800 x 600, please select GCV5-n2_800x600x18bit. 4 - 4 Chapter 4 Driver Installation...
  • Page 53 T o u c h P a n e l P C A H P - 1 0 8 3 4 - 5 Chapter 4 Driver Installation...
  • Page 54 T o u c h P a n e l P C A H P - 1 0 8 3 If you want to update driver, please uninstall driver first. Uninstall IEMGD 1. Double click on the IEMGDInstallCC.exe 2. Follow the instructions that the window shows 3.
  • Page 55 T o u c h P a n e l P C A H P - 1 0 8 3 folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 5 – Install Touch Driver 1.

Table of Contents