Related Manuals for Aaeon AHP-2153
Summary of Contents for Aaeon AHP-2153
- Page 1 T o u c h P a n e l P C A H P - 2 1 5 3 AHP-2153 ® Onboard Intel Atom™ D2700 2.13 GHz Processor Touch Panel PC With 15” TFT LCD AHP-2153 Manual 1st Ed. May 2012...
-
Page 2: Copyright Notice
AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users. - Page 3 T o u c h P a n e l P C A H P - 2 1 5 3 Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. ...
-
Page 4: Packing List
A H P - 2 1 5 3 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: AHP-2153 Touch Panel PC Mounting brackets and screws DVD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately. - Page 5 T o u c h P a n e l P C A H P - 2 1 5 3 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
- Page 6 T o u c h P a n e l P C A H P - 2 1 5 3 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged. The equipment has obvious signs of breakage.
- Page 7 T o u c h P a n e l P C A H P - 2 1 5 3 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb)
-
Page 8: Table Of Contents
T o u c h P a n e l P C A H P - 2 1 5 3 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Specification .............. 1-3 1.3 Dimension ..............1-6 Chapter 2 Hardware Installation 2.1 Panelmount Installation .......... -
Page 9: Chapter 1 General Information
T o u c h P a n e l P C A H P - 2 1 5 3 Chapter General Information 1- 1 Chapter 1 General Information... -
Page 10: Introduction
Ethernet controller, multi-COM port interfaces and an audio controller. With a built-in CompactFlash socket, the AHP-2153 is as compact and user friendly as a multi-function computer. In addition, its "fit anywhere" design makes it very flexible and able to be used in many different kinds of installations. -
Page 11: Specification
T o u c h P a n e l P C A H P - 2 1 5 3 1.2 Specification System ® Onboard Intel Atom™ D2700 2.13 GHz Processor System Memory DDR3 SODIMM x 1, Max. 4 GB ... - Page 12 T o u c h P a n e l P C A H P - 2 1 5 3 (389.98mm x 323.48mm x 78.3mm) Carton Dimension 17.9”(W) x 12.6”(H) x 15.75”(D) (455mm x 320mm x 400mm) Net Weight 13.64 lb (6.2 kg) ...
- Page 13 T o u c h P a n e l P C A H P - 2 1 5 3 Display Type 15” TFT LCD Max. Resolution 1024x768 Max. Colors 16.7M colors Luminance (cd/m HTT : 400 STT : 800 ...
-
Page 14: Dimension
T o u c h P a n e l P C A H P - 2 1 5 3 1.3 Dimension 1- 6 Chapter 1 General Information... - Page 15 T o u c h P a n e l P C A H P - 2 1 5 3 Chapter 1 General Information...
-
Page 16: Chapter 2 Hardware Installation
T o u c h P a n e l P C A H P - 2 1 5 3 Chapter Hardware Installation Chapter 2 Quick Installation Guide... -
Page 17: Panelmount Installation
T o u c h P a n e l P C A H P - 2 1 5 3 2.1 Panelmount Installation The display panel can be mounted into the wall. You will need the screws along with the mounting brackets, which be packed in the accessory box. - Page 18 T o u c h P a n e l P C A H P - 2 1 5 3 Complete Illustration 2 - 3 Chapter 2 Quick Installation Guide...
-
Page 19: Com1/2 Rs-232/422/485 Serial Port Connector
T o u c h P a n e l P C A H P - 2 1 5 3 2.2 COM1/2 RS-232/422/485 Serial Port Connector COM1 (D-sub 9 male) S ignal S ignal COM2 RS-232/422/485 (D-sub 9 male) Signal Signal RXD (422RXD+) (422TXD-/485DATA-) -
Page 20: Hard Disk Drive Installation
T o u c h P a n e l P C A H P - 2 1 5 3 2.3 Hard Disk Drive Installation Step 1: Unfasten the screws of the heatsink Step 2: Get the Bracket of Hard Disk Drive from the package 2 - 5 Chapter 2 Quick Installation Guide... - Page 21 T o u c h P a n e l P C A H P - 2 1 5 3 Step 3: Fasten the Hard Disk onto the bracket 2 - 6 Chapter 2 Quick Installation Guide...
- Page 22 T o u c h P a n e l P C A H P - 2 1 5 3 Step 4: Fasten the screws of the hard disk bracket onto the AHP-2153 2 - 7 Chapter 2 Quick Installation Guide...
-
Page 23: Chapter 3 Ami Bios Setup
T o u c h P a n e l P C A H P - 2 1 5 3 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1... -
Page 24: System Test And Initialization
3. The CMOS memory has lost power and the configuration information has been erased. The AHP-2153 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down. -
Page 25: Ami Bios Setup
T o u c h P a n e l P C A H P - 2 1 5 3 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. -
Page 26: Setup Menu
T o u c h P a n e l P C A H P - 2 1 5 3 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system. - Page 27 T o u c h P a n e l P C A H P - 2 1 5 3 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters CPU Configuration CPU Configuration Parameters SATA Configuration SATA Device Options Settings USB Configuration USB Configuration Parameters Super IO Configuration...
- Page 28 T o u c h P a n e l P C A H P - 2 1 5 3 System Super IO Chip Parameters H/W Monitor Monitor hardware status ACPI Settings Options summary: (default setting) Suspend Disabled ACPI Sleep State S1 only(CPU Stop Clock) S3 only(Suspend to RAM) Select the ACPI state used for System Suspend...
- Page 29 T o u c h P a n e l P C A H P - 2 1 5 3 Disabled Enabled or disabled wake on ring function. RTC Wake Settings Enable system to wake from S5 using RTC alarm. RTC Wake Settings Options summary: (default setting) Wake system with Fixed...
- Page 30 T o u c h P a n e l P C A H P - 2 1 5 3 Wake up hour 0-23 Wake up minute 0-59 Wake up second 0-59 Wake system with Disabled Dynamic Time Enabled Enable or disable System wake on alarm event. Wake up time is current time + Increase minutes.
- Page 31 T o u c h P a n e l P C A H P - 2 1 5 3 Options summary: (default setting) Hyper-Threading Disabled Enabled En/Disable CPU Hyper-Threading function SATA Configuration (IDE) Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller...
- Page 32 T o u c h P a n e l P C A H P - 2 1 5 3 AHCI Configure SATA controller operating as IDE/AHCI mode. SATA Configuration (AHCI) Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller Configure SATA as AHCI Configure SATA controller operating as IDE/AHCI mode.
- Page 33 T o u c h P a n e l P C A H P - 2 1 5 3 SATA Port 0/Port 1 Disabled Enabled En/Disable the selected port. SATA Port 0/Port 1 Hot Plug Disabled Enabled En/Disable Hot Plug feature for specified port. USB Configuration Options summary: (default setting) Legacy USB Support...
- Page 34 T o u c h P a n e l P C A H P - 2 1 5 3 Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS. AUTO option disables legacy support if no USB devices are connected.
- Page 35 T o u c h P a n e l P C A H P - 2 1 5 3 Super IO Configuration Options summary: (default setting) Serial Port 1/2/3 Configuration Set Parameters of Serial Port 1/2/3 Restore AC Power Loss Power Off Power On Last State...
- Page 36 T o u c h P a n e l P C A H P - 2 1 5 3 Serial Port 1 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3F8h; IRQ=4; IO=3F8h;...
- Page 37 T o u c h P a n e l P C A H P - 2 1 5 3 Select a resource setting for Super IO device. Serial Port 2 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port.
- Page 38 T o u c h P a n e l P C A H P - 2 1 5 3 IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; Select a resource setting for Super IO device. COM2 Type Select RS232 RS422 RS485 Configure COM2 operated as RS232, RS422 or RS485. Serial Port 3 Configuration Options summary: (default setting) Serial Port...
- Page 39 T o u c h P a n e l P C A H P - 2 1 5 3 Enabled En/Disable specified serial port. Change Settings Auto IO=3E8h; IRQ=10; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select a resource setting for Super IO device. H/W Monitor Chapter 3 AMI BIOS Setup 3-17...
- Page 40 T o u c h P a n e l P C A H P - 2 1 5 3 Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters Chapter 3 AMI BIOS Setup 3-18...
- Page 41 T o u c h P a n e l P C A H P - 2 1 5 3 Host Bridge Options summary: (default setting) Intel IGD Configuration Config Intel IGD Settings. Chapter 3 AMI BIOS Setup 3-19...
- Page 42 T o u c h P a n e l P C A H P - 2 1 5 3 Intel IGD Configuration Options summary: (default setting) IGFX - Boot Type VBIOS Default LVDS CRT+LVDS Select Primary boot display device LVDS Panel Type 640x480 18-Bit...
- Page 43 T o u c h P a n e l P C A H P - 2 1 5 3 1280x768 18-Bit 640x480 24-Bit 800x600 24-Bit 1024x768 24-Bit 1280x768 24-Bit 1366x768 24-Bit Select panel native resolution. Control LVDS1 Disable Enable Enable/Disable LVDS Fixed Graphics Memory 128MB...
- Page 44 T o u c h P a n e l P C A H P - 2 1 5 3 South Bridge Options summary: (default setting) Power Mode ATX Type AT Type Select the power type used on the system TPT Devices HD audio and onboard LAN Settings.
- Page 45 T o u c h P a n e l P C A H P - 2 1 5 3 TPT Devices Options summary: (default setting) Azalia Controller Disabled HD Audio Enable or disabled Azalia controller R8111E #1 Controller Disabled Enabled Enable or disable PCIE Lan.
- Page 46 T o u c h P a n e l P C A H P - 2 1 5 3 PCIe mini-Card Slot Options summary: (default setting) PCIe MiniCard Slot Disabled Enabled Control the PCI Express Root Port. Chapter 3 AMI BIOS Setup 3-24...
- Page 47 T o u c h P a n e l P C A H P - 2 1 5 3 Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo. Launch RTL8111E PXE Disabled OpROM Enabled En/Disable PXE boot for RTL8111E LAN Boot Option #X/...
- Page 48 T o u c h P a n e l P C A H P - 2 1 5 3 BBS Priorities Options summary: (default setting) Boot Option #x Disabled Device name Sets the system boot order Chapter 3 AMI BIOS Setup 3-26...
- Page 49 T o u c h P a n e l P C A H P - 2 1 5 3 Setup submenu: Security Options summary: (default setting) Administrator Password/ Not set User Password Chapter 3 AMI BIOS Setup 3-27...
- Page 50 T o u c h P a n e l P C A H P - 2 1 5 3 You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility.
- Page 51 T o u c h P a n e l P C A H P - 2 1 5 3 Options summary: (default setting) Set User Password/ Not set Set Master Password You can install a Master and User password. Before booting to OS, HDD will be set to frozen state.
- Page 52 T o u c h P a n e l P C A H P - 2 1 5 3 Setup submenu: Exit Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.
-
Page 53: Chapter 4 Driver Installation
T o u c h P a n e l P C A H P - 2 1 5 3 Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation... - Page 54 T o u c h P a n e l P C A H P - 2 1 5 3 The AHP-2153 comes with a DVD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 –...
- Page 55 T o u c h P a n e l P C A H P - 2 1 5 3 4.1 Installation: Insert the AHP-2153 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver 1.
- Page 56 T o u c h P a n e l P C A H P - 2 1 5 3 2. Double click on the Setup.exe located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 5 –...
- Page 57 T o u c h P a n e l P C A H P - 2 1 5 3 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 8 – Install GPS Driver (Optional) Click on the STEP8-GPS (option) folder and select the OS folder your system is.
-
Page 58: Appendix A Ahci Setting
T o u c h P a n e l P C A H P - 2 1 5 3 Appendix AHCI Setting Appendix A AHCI Setting... -
Page 59: Setting Ahci
T o u c h P a n e l P C A H P - 2 1 5 3 A.1 Setting AHCI OS installation to setup AHCI Mode. Step 1: Copy the files below from “Driver CD -> STEP5-AHCI\WINXP_32” to Disk Step 2: Connect the USB Floppy to the system Step 3: Setup OS... - Page 60 T o u c h P a n e l P C A H P - 2 1 5 3 Step 4: Press “F6” Step 5: Choose “S” Appendix A AHCI Setting...
- Page 61 T o u c h P a n e l P C A H P - 2 1 5 3 Step 6: Choose “Intel(R) NM10 Express Chipset” Step 7: It will show the model number you select and then press “ENTER Step 8: Setup is loading files Appendix A AHCI Setting...