Page 1
L C D D i s p l a y A C D - 1 1 0 D ACD-110D 10.1” WXGA Multi-touch Display On-screen Display Settings Aluminum Front Bezel Projected Capacitive Multi-Touch Screen ACD-110D Manual 2 May 22, 2015...
AAEON, assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
Page 3
L C D D i s p l a y A C D - 1 1 0 D Acknowledgments ® ® Intel is registered trademarks of Intel Corporation. IBM, PC/AT, PS/2 are trademarks of International Business Machines Corporation. ®...
A C D - 1 1 0 D Packing List The LCD monitor should be packaged with the following items. Please check that all of them are included and in good condition. ACD-110D Utility CD-ROM Contains User’s Manual (in PDF format), Drivers and Utilities ...
Page 5
L C D D i s p l a y A C D - 1 1 0 D Safety & Warranty Please read the following safety instructions carefully. It is advised that you keep this manual for future references Disconnect this device from any AC supply before cleaning. While cleaning, use a damp cloth instead of liquid or spray detergents.
Page 6
L C D D i s p l a y A C D - 1 1 0 D Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the...
Page 7
L C D D i s p l a y A C D - 1 1 0 D This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause...
Page 8
L C D D i s p l a y A C D - 1 1 0 D China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Display 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ×...
L C D D i s p l a y A C D - 1 1 0 D Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 General Specification ..........1-4 1.4 Dimensions ..............1-6 Chapter 2 Hardware Installation 2.1 Before Unpacking ............
Page 10
L C D D i s p l a y A C D - 1 1 0 D 3.7 RGB Color- Submenu..........3-8 3.8 Language- Submenu..........3-9 3.9 Auto Config- Submenu..........3-10 3.10 Resolution- Submenu..........3-11 3.11 Exit Menu- Submenu.
L C D D i s p l a y A C D - 1 1 0 D 1.1 Introduction Thank you for purchasing the ACD-110D Industry Display Panel TFT LCD monitor. The LCD monitor has been designed to provide the best performance for many applications.
L C D D i s p l a y A C D - 1 1 0 D 1.2 Features 10.1” WXGA (1280 x 800) TFT LCD Display IP65 Aluminum Front Bezel P-CAP Touchscreen Support (7H, two-point multi-touch) VESA 75, Panel Mount and Stand Support ...
L C D D i s p l a y A C D - 1 1 0 D 1.3 General Specification Type Color TFT, LED backlight Size 10.1" TFT LCD IP65 aluminum front bezel and SGCC Construction chassis ...
Page 15
L C D D i s p l a y A C D - 1 1 0 D Transmission Controller USB interface Environmental Operating 32°F~ 113°F (0°C to 45°C) without airflow temperature 32°F~ 122°F (0°C to 50°C) with airflow ...
L C D D i s p l a y A C D - 1 1 0 D 2.1 Before Unpacking It is very important to place the LCD Display in a suitable environment. The surface for placing the LCD Display should be stable and leveled.
L C D D i s p l a y A C D - 1 1 0 D 2.2 Connecting to Power Supply To power the LCD Display, connect the provided AC-DC adapter and power cord to the power input socket of the monitor. Tighten the connector to secure the connection.
L C D D i s p l a y A C D - 1 1 0 D 2.3 Connecting to the Computer Turn off the computer and the LCD Display before connecting. Use the Monitor-to-PC VGA、DVI-D cable to connect the LCD Display to your computer.
L C D D i s p l a y A C D - 1 1 0 D 2.5 DVI Port Connector *DVI cable not included. Signal Signal N.C. TMDS Data 2+ TMDS Data 2/4 shield TMDS Data 4- TMDS Data 4+ DDC clock DDC data N.C.
L C D D i s p l a y A C D - 1 1 0 D 2.6 Touchscreen Mini USB Connector Signal Signal DATA (-) DATA (+) N.C. GND, Ground Chapter 2 Hardware Installation...
L C D D i s p l a y A C D - 1 1 0 D 2.7 VESA Wall Mount Mounting the LCD Display with UL Listed wall mount Brackets only. The LCD Display can be mounted on a monitor arm or wall mount plate.
Page 25
L C D D i s p l a y A C D - 1 1 0 D VESA Mounting Holes To mount the LCD Display onto a monitor arm or wall mount plate, please follow the steps below. Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the monitor arm or wall mount plate.
L C D D i s p l a y A C D - 1 1 0 D 2.8 Mounting the Display Step 1: Get the wallmount bracket and sponge ready. Sponge Wall mount bracket Step 2: Remove the six screws (three on each side) at the back and place the wallmount brackets onto the display.
Page 27
L C D D i s p l a y A C D - 1 1 0 D Step 4: Insert the display to the surface (opening) where you are going to mount the display Opening wall Step 5: Attach the mounting clips to the four fillisters on the wallmount brackets and tighten the four M4x60 screws to secure the brackets M4x60 screw 4-mounting clip...
L C D D i s p l a y A C D - 1 1 0 D 3.1 On-screen Display (OSD) Board Buttons Function Automatically adjust clock, phase, H-position and V-position. Auto Enable fullscreen for the most optimal settings ...
L C D D i s p l a y A C D - 1 1 0 D 3.2 OSD Main Menu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.3 Input Source Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.4 Contrast/ Brightness- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.5 Geometry Menu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.6 Color Temperature- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.7 RGB Color- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.8 Language- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.9 Auto Config- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.10 Resolution- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 3.11 Exit Menu- Submenu Power On/Off the LCD Monitor Power On/Off the LCD Monitor Increase the gaguge value of the selected option Increase the gaguge value of the selected option Available Key Functions Decrease the gaguge value of the selected option...
L C D D i s p l a y A C D - 1 1 0 D 4.1 Introduction The ACD-110D Series touch screen uses Projected Capacitive Multi-Touch technology to provide more accurate sensing capacity than other technologies. The touch screen is specially designed for any infotainment application and has been approved for FCC Class A standards.
Need help?
Do you have a question about the ACD-110D and is the answer not in the manual?
Questions and answers