Aaeon PC-3200 User Manual page 25

F a n l e s s P a n e l P C s P C - 3 2 0 0
Method 3: Use a CD-ROM
If required, insert your operating system's installation or setup diskette into the
diskette drive until the release button pops out.
The BIOS of the panel PC supports system boot-up directly from the CD-ROM
drive. You may also insert your system installation CD-ROM into the CD-ROM
drive.
Power on your panel PC or reset the system by pressing the "Ctrl"+"Alt"+"Del"
keys simultaneously. The panel PC will automatically load the operating system
from the diskette or CD-ROM.
If you are presented with the opening screen of a setup or installation program,
follow the instructions on screen. The setup program will guide you through
preparation of your hard drive, and installation of the operating system. If you are
presented with an operating system command prompt, such as A:\>, then you
must partition and format your hard drive, and manually copy the operating
system files to it. Refer to your operating system user's manual for instructions on
partitioning and formatting a hard drive.
Installing the Drivers
After installing your system software, you will be able to set up the Ethernet,
SVGA, audio, and touch screen functions. All drivers are stored in a CD-ROM
disc entitled "Drivers and Utilities" which can be found in your accessory box.
The standard procedures for installing the drivers are described in Chapters 5, 6, 7,
8 respectively.
PC-3200 Series User Manual V1.2 25