Toshiba 3560 Operator's Manual page 30

3. USING THE AUTOMATIC DOCUMENT FEEDER (Cont.)
5 5 5 5 5
Place the originals.
G After aligning the edges of the originals,
set them face up on the original feed tray
and align the side guides to the edges of
the originals.
G Up to 50 originals (A4, A4-R, B5, B5-R,
A5-R, 64~80 g/m
A3, B4 and Folio sized originals (64~80g/
m 2 ) should be 25 or less.
G When copying in the staple mode using
an optional staple sorter, be careful as
the number of originals that can be set is
different from the numbers mentioned
above (see page 112).
G To set larger originals, pull out the
extension holder.
6 6 6 6 6
Press the PRINT
G The originals will be fed starting with the
lowermost one, copied and then will exit
onto the original exit area.
28
2 ) can be set at a time.
key.