To Remove The Slider Cover - Valor BLACK BEAUTY 348 Installer And Owner Manual

INSTALLER GUIDE

12.13 To remove the slider cover.

1. Remove the fascia as in section 12.2.
2. Remove the large black baffle from the top of the heat exchanger. To do this
unscrew and remove two screws.
3. Unscrew and remove the two screws from the left hand side of the cover.
4. Carefully lift the cover and rotate it clockwise to enable the cover to be lifted over
the slider button.
5. Refit in the reverse order.
Page 30
©
GDC Group Ltd. 2011