Door Parts; Replacing The Glass; Replacing The Door Gasket; Blower And Electrical Parts - Travis Industries Flush Wood Plus Owner's Manual

28

Door Parts

2
1
ID # Description
1 Gasket Cement, 4 oz
3 (4) Clips w Screws, Gaskets - Rect
(4) Clips w Screws, Gaskets - Arched
5 Glass (w Gasket) – Rectangle
Glass (w Gasket) - Arched
7 Handle Assembly

Replacing the Glass

The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips.
Lay the glass gasket in the door frame (cut off excess gasket). Place the glass on the gasket. Secure
the glass clips to hold the glass in place (make sure the glass clip gaskets are in place).

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.

Blower and Electrical Parts

ID # Description
1 Left Blower
3 (4) Blower Grommets w Spacers
5 Rhoestat Knob w Nut
7 Thermodisk
© Travis Industries
Maintaining Your Appliance
5
3
Qty Part #
1 99900427
1 250-02191
1 250-02193
1 250-02183
1 250-02195
1 250-02196
1
7
3
2
Qty Part #
1 228-10069
1 250-00369
1 250-00869
1 228-30050
100-01259
6
4
ID # Description
2 Door Gasket, 3/8" x 70"
4 (2) Clip Gaskets
6 Glass Gasket (1/4" X 65")
8 Wood Handle w Screw
4
5
ID # Description
2 Right Blower
4 Rheostat
6 Power Cord
7
8
Qty Part #
1 99900429
1 250-02194
1 250-02184
1 250-01305
6
Qty Part #
1 228-10070
1 250-00302
1 250-00316
4150520