Door Parts
2
1
ID #
Description
1
Gasket Cement, 4 oz.
3
(4) Clips w Screws, Gaskets - Rect
(4) Clips w Screws, Gaskets - Arched
5
Glass (w Gasket) – Rectangle
Glass (w Gasket) - Arched
7
Handle Assembly
Replacing the Glass
The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips. Use only 5mm thick
neo-ceramic glass.
Lay the glass gasket in the door frame (cut off excess gasket). Place the glass on the gasket. Secure
the glass clips to hold the glass in place (make sure the glass clip gaskets are in place).
Replacing the Door Gasket
The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.
Blower and Electrical Parts
ID #
Description
1
Left Blower
3
(4) Blower Grommets w Spacers
5
Rheostat Knob w Nut
7
Thermodisk
© Travis Industries
Maintaining Your Appliance
5
3
Qty.
Part #
1
99900427
1
250-02191
1
250-02193
1
250-02533
1
250-02195
1
250-02196
1
7
3
2
Qty.
Part #
1
1
1
1
100-01291
6
4
ID #
Description
2
Door Gasket, 3/8" x 80"
4
(2) Clip Gaskets
6
Glass Gasket (1/4" X 76")
8
Wood Handle w Screw
4
5
ID #
Description
2
Right Blower
4
Rheostat
6
Power Cord
27
7
8
Qty.
Part #
1
99900429
1
250-02194
1
250-02184
1
250-01305
6
Qty.
Part #
1
1
1
4060512