Hood And Grille; Body Panels - Arctic Cat Wildcar Trail Service Manual

2. Install the lower bumper cap screws (C); then tighten
the upper and lower bumper cap screws to 20 ft-lb.
3. Install the cap screws and nuts securing the radiator to
the frame (B). Tighten to 8 ft-lb.
4. Install the cap screws securing the front fenders to the
frame; then tighten securely.
5. Connect the headlights.
6. Using the existing cap screws, secure the grille and
tighten securely.
7. Install the hood and secure with the quarter-turn fas-
teners

Hood and Grille

REMOVING/INSTALLING HOOD
1. Turn the two quarter-turn fasteners counterclockwise
and remove hood.
2. Insert the hood tabs into the grille and lay the hood
down flat. Turn both of the fasteners clockwise secur-
ing the hood.
WT548A
REMOVING GRILLE
Remove the fasteners securing the grille; then remove the
grille.
CLEANING AND INSPECTION GRILLE
Clean any dirt or debris from the grille webbing. This
helps air flow to the radiator and oil cooler.
INSTALLING GRILLE
Place the grille into position and secure it using the exist-
ing cap screws. Tighten all hardware to 60 in.-lb.
REMOVING REAR BODY PANELS
1. Remove the seats.
2. Remove the push pins and cap screws securing the
rear fenders.
WT226A

Body Panels

WT251
WT256A
17