Exhaust System; Cargo Box - Arctic Cat Wildcar Trail Service Manual

To install the gauge, connect the multi-pin connector and
press the gauge into the dash.
 NOTE: Ensure the rubber mounting ring is oriented
correctly on the tab and seats fully through the dash.

Exhaust System

REMOVING MUFFLER
1. Remove the two exhaust springs at the muffler/
exhaust pipe juncture.
! WARNING
The heat deflector under the right-rear fender has sharp
edges and can cause serious injury if care is not taken.
2. Slide the muffler assembly clear of the holder pins.
Account for the exhaust gasket.
INSPECTING MUFFLER
1. Inspect muffler externally for cracks, holes, and dents.
2. Inspect the muffler internally by shaking the muffler
back and forth and listening for rattles or loose debris
inside the muffler.
 NOTE: For additional details on cleaning the muffler/
spark arrester, see Periodic Maintenance/Tune-Up.
INSTALLING MUFFLER
1. With the gasket in place, place the muffler onto the
holder pins and slide into position.
WT339
 NOTE: Starting with the upper rear pin will aid in
installing.
2. Secure the muffler to the exhaust pipe with the two
exhaust springs.
WT601A
REMOVING
1. Remove the seats and rear fenders.
2. Remove the LED taillight assembly.
3. Remove the fasteners securing the upper rear body
panel to the splash guard.
WT295
4. Remove the fasteners securing the cargo box.

Cargo Box

WT293A
WT229A
33