Shift Cable - Arctic Cat Wildcar Trail Service Manual

2. Remove the cap screw from the shift cable pivot bolt
(A), remove the axle bolt (B), and account for plastic
inserts (C).
3. Remove the shift lever.
INSTALLING
1. Connect the shift cable to the shift arm with the pivot
bolt and new lock nut. Tighten to 8 ft-lb.
2. Place the shift lever into position and secure with the
axle bolt, plastic inserts, and new lock nut. Tighten to
20 ft-lb.
3. Install the center console, shifter knob, and seats.
Make sure the seats lock securely in place.

Shift Cable

REMOVING
1. Remove the seats and center console.
2. Remove the E-clip securing the shift cable to the
transaxle.
WT281B
3. While holding the nut (B), loosen the jam nut (A) and
remove the shift cable from the transaxle.
4. Remove the cap screw and lock nut securing the shift
WT296A
cable to the shift arm. Discard the nut.
5. Cut the plastic wire ties securing the cable to frame
noting their locations for installing.
6. Loosen the jam nut (A) securing the shift cable on the
shifter bracket and remove the shift cable noting the
cable location for installing.
WT439B
WT225B
WT296B
31