Table of Contents
Advertisement
1
Introduction
SERIAL ATA
3Gbps (CT132-BR) or 1.5Gbps (CT132-B), it improves hard drive
performance faster than the standard parallel ATA whose data trans-
fer rate is 100MB/s. The Intel ICH7R chip on CT132-BR allows
configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1,
RAID 0+1 and RAID 5.
gigabit lan
and peripheral devices. The IRDA (Infrared Data Association) specifi-
cation supports data transfers of 115K baud at a distance of 1
meter.
while USB 2.0 supports 480Mb/second bandwidth providing a
marked improvement in device transfer speeds between your com-
puter and a wide range of simultaneously accessible external Plug
and Play peripherals.
wake-on-ring
wake-up/power-on to respond to calls coming from an external mo-
dem or respond to calls from a modem PCI card that uses the PCI
PME (Power Management Event) signal to remotely wake up the
PC.
12
Serial ATA is a storage interface that is compliant
with SATA 1.0 specification. With speed of up to
The Realtek PCI Express Gigabit LAN controller
supports up to 1Gbps data transmission.
The system board is equipped with an IrDA connec-
irda
tor for wireless connectivity between your computer
The system board supports USB 2.0 and USB 1.1
USB
por ts. USB 1.1 supports 12Mb/second bandwidth
Important:
The 5V_standby power source of your power supply must sup-
port ≥ 720mA.
This feature allows the system that is in the
Suspend mode or Soft Power Off mode to
Advertisement
Table of Contents
