Table of Contents
Advertisement
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor for
Windows utility. This utility is included in the CD that came with
the system board. Refer to the Hardware Monitor for Windows
section in chapter 4 for more information.
Smart SYSFAN Temperature
This field is used to select the temperature at which the system fan
runs at full speed. The temperature will vary within the range of the
tolerance value selected in the field below.
SYSFAN Tolerance Value
This field is used to select the tolerance value of the system's tem-
perature. The options are 1, 2, 3, 4 and 5. If you selected 3, it allows
the temperature to run 3 degrees higher or lower. The system fan
will smartly adjust it's speed in accordance to the temperature.
Smart CPUFAN Temperature
This field is used to select the temperature at which the CPU fan
runs at full speed. The temperature will vary within the range of the
tolerance value selected in the field below.
CPUFAN Tolerance Value
This field is used to select the tolerance value of the CPU's tempera-
ture. The options are 1, 2, 3, 4 and 5. If you selected 3, it allows the
temperature to run 3 degrees higher or lower. The CPU fan will
smartly adjust it's speed in accordance to the temperature.
3
BIOS Setup
87
Advertisement
Table of Contents
