Table of Contents
Advertisement
2
Hardware Installation
Jumper Settings
Clear CMOS Data
KB
Mouse
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP1 pins 2 and 3 to On. Wait for a few seconds and set JP1
back to its default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
24
1
JP1
2
3
1-2 On: Normal
(default)
Clear CMOS Data
1
2
3
2-3 On:
Advertisement
Table of Contents
