Creating Presets; Working With Presets; Working With Audio - Analog way Ops200 User Manual

Creating presets

OPS200
The allows the creation of user defined presets very easily.
Any setup you have configured on screen, can be stored into one of
the 4 available user presets.
1/ After having configured layers, PIP transitions, logos... on your
screen (see "Working With the RCS" chapter), click on one of the
four available Preset buttons.
2/ In the dropdown menu, choose Save From Main or Save From
Preview to determine which screen you want to memorize the
preset from.
3/ By clicking one of the two options, the RCS will automatically load
and preview the selected Preset.
4/ Click the [TAKE]

Working with presets

The four OPS200
during your show or event.
1/ Click one of the four available Preset buttons to choose which
memory you wish to use. Select Load to Preview from the
dropdown menu, your preset will appear on the Preview screen.
2/ Once you have selected your preset, simply click the
button to view the result on your main screen.

Working with audio

OPS200
The allows to work with up to 9 stereo inputs, 1 Auxiliary
input, and 2 embedded SDI audio inputs (via the SDI BNC
connectors), all accessible via the Audio menu of the OPS200, and
which can be affected to one or both of the 2 independant symetrical/
asymetrical outputs of the device.
48
button to view your preset on the Main screen.
user presets can be called back at any stage
[TAKE]