Software Overview - Analog way Ops200 User Manual

Software overview

The RCS software for your
allows you to navigate through the equivalent of the
Menu"). The green window of the RCS represents
sources, frames, layers and logos directly by clicking on the corresponding
through the different available tabs. The red window of the RCS represents your Main window, and can also
be used much like the front panel of the OPS200. Create user presets directly in the RCS main window, by
clicking on one of the four available Preset icons
unwanted steps with the clear button,
make smooth takes directly with your mouse or trackpad with the virtual T-bar.
allow you to view any changes made to your preview screen on your main screen, and Analog Way engineers
have even implemented a Stepback button
manipulation error. The status section
4
5
6
The RCS software for your
section. It allows you to quickly access all of the OPS200 functions via a single page interface, and easily edit
your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the
wish to run.
OPS200 is composed of several easily identified sections. The tabs menu
5
reload a fresh copy of your screen via the Reload Main button
8
allows for easy monitoring of the connection status.
10
10
1
2
OPS200 can be viewed as the software version of the
OPS200
front panel menu items (see also "The OPS200
2
your Preview window, and can be used to parameter
4
and setting up your preset in the Preview window. Clear
to quickly move back to your previous setup in the case of a
3
button, then navigating
7
The Take button will
7
3
OPS200 front panel menu
OPS200
1
6
9
8
9
you
43