Remote Control Software; The Ops200 Rcs; Rcs Presentation; How To Use The Rcs - Analog way Ops200 User Manual

REMOTE CONTROL SOFTWARE

5-1. THE OPS200 RCS

RCS presentation

Your OPS200 is shipped with a Windows compatible control software. The RCS software allows you to control
your OPS200 in exactly the same way as with the front panel of the device, only using your PC as a remote.

How to use the RCS ?

You have to install the software on a Computer and have a LAN board or RS-232 link to use the RCS. After
the installation, launch the program and proceed to the network establishment.

Software installation

1. Connect you on www.analogway.com.
2. In the menu, select [Technical Support] menu, then click on [Remote Control Software], select the name
of your device and click on [Download].
3. Click on [Open with] or [Register the file], select the .exe file.
4. Follow the Windows installation instructions.
42