Table of Contents
Advertisement
Layer Transitions & effects
The
OPS200
offers a wide variety of transitions between the scenes
you create for your shows and events. It allows for live recall of
4 user presets, each of which you can edit at any given time.
Whether catering for complex event setups, or putting together
intricate shows, your
could expect from a dedicated mixer, along with its switcher and
scaler capabilities.
1/ In the Layer Selection section, press the PIP1 button. The button
will start blinking. On your Preview screen, PIP1 will appear as
a color rectangle. The parameters of the layer will automaticaly
appear on your
OPS200
2/ In the Layer menu, make the position, size, border and
transparency settings you like, then select Opening Effect in the
layer options, press the
Slide Left - Right for example, and press the
confirm. Navigate to Duration in the Opening Effect sub-menu,
and set the duration of your effect by rotating the SCROLL knob
and pressing [ENTER].
3/ Repeat the procedure in the Closing Effect sub-menu to determine
the way your layer will close. Try Slide From Left - Right for the
closing type with a duration of 1.5 seconds for example.
Creating Presets
The
OPS200
allows the creation of user defined presets very easily.
Any setup you have configured on screen, can be stored into one of
the 4 available user presets.
1/ After having configured layers, PIP transitions, logos... on your
screen (see 'Working With the OPS200'), go to the Preset menu
by pressing the
rotating the scroll knob. Then, press the
the Preset sub-menu. Choose Preset Copy by scrolling with the
corresponding knob, and press the
sub-menu.
2/ In the sub-menu, choose Save From Main or Save From Preview
to determine which screen you want to memorize the preset
from, then set the preset memory (#1 to #4) you wish to use as
your "User Preset" (by default, the
available preset in the
3/ By pressing the
confirm. Select Yes, your screen is memorized as a preset.
32
OPS200
will also deliver some of what you
VFD menu screen.
[ENTER]
button and select Type. Select
[EXIT/MENU]
button, and select Preset by
[ENTER]
[ENTER]
OPS200
OPS200
memory).
OPS200
[ENTER]
button, the
[ENTER]
button to
button to enter
button to access the
will choose the next
will ask you to
Advertisement
Table of Contents
Need help?
Do you have a question about the Ops200 and is the answer not in the manual?