GB
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary cutting protection and accessories.
2
INTRODUCTION
The plasma power source Powercut 900 and the plasma cutting torch PT-38 are a
complete and safe plasma cutting system for manual cutting and gouging. It delivers
cutting power for severing materials up to 32 mm thickness.
ESAB's accessories for the product can be found on page 25.
2.1
Equipment
The power source is supplied with:
S
mains cable, 3 m
S
instruction manual
S
return cable incl clamp
S
plasma cutting torch PT 38, 7.5 m, supplied according to the denomination on
page 24.
3
TECHNICAL DATA
Mains voltage
Mains supply
Setting range
Permitted load
60 % duty cycle
100 % duty cycle
Efficiency at maximum current
Open-circuit voltage U
Operating temperature
Transportation temperature
Sound pressure at no load
Dimensions, l x w x h
Weight
Insulation class transformer
Enclosure class
bp17ea
Powercut 900
3 x 230 V, 400 V $10 % 50/60 Hz
Ssc min. 4.0 MVA
Zmax. 0.04 W
20 – 60 A
60 A / 120 V
50 A / 120 V
87 %
290 V
0
–
10 to 40 °C
–
20 to 55 °C
< 70 db (A)
630x 322 x 379 mm
35 kg
H
IP 23
- 6 -