Gpi In Calibration ("5. Utility" ➝ "Gpi Calibration"); Network Settings ("6. Network Setup"); Ip Address Mode Setting ("6. Network Setup" ➝ "Ip Address Mode"); Ip Address Setting ("6. Network Setup" ➝ "Ip Address") - Yamaha ACD1 Reference Manual

Panel operations
■ GPI IN calibration ("5. Utility" ➝ "GPI Calibration")
Calibrates the detected range of the [GPI IN] connector input voltage.
Parameter
Port No.
Minimum/maximum
value setting
Voltage value

Network settings ("6. Network Setup")

Here you can make network settings for the ACD1.
■ IP Address Mode setting ("6. Network Setup" ➝ "IP Address Mode")
This specifies whether the ACD1's IP address will be set automatically by
Amp Editor's Network Setup or a DHCP server, or manually.
Parameter
IP Address Mode
• If you're using a DHCP server, start up the DHCP server before the ACD1.
NOTE
• For details on this mode, refer to the Amp Editor owner's manual.
■ IP Address setting ("6. Network Setup" ➝ "IP Address")
If the IP Address Mode is Manual, the ACD1's IP address will be specified
manually.
If the IP Address Mode is DHCP, the assigned IP address will be displayed.
Parameter
IP Address
• If the IP Address mode is DHCP, the manually assigned IP address will be ignored.
NOTE
■ Checking the MAC address ("6. Network Setup" ➝ "MAC Address")
This displays the MAC address of the ACD1's [NETWORK] connector.
16
ACD1 Reference Manual
Range
1–4 Selects the port of the [GPI IN] connector that will be calibrated.
Min/Max Selects whether you will be setting the minimum (Min) or maximum (Max) value for
the input voltage.
-- Indicates the input voltage.
At the left of the "–>" symbol is shown the specified voltage (maximum/minimum
value), and at the right is shown the current input voltage. When you confirm the set-
ting, the current input voltage will be assigned as the maximum/minimum value.
Range
DHCP The address will be set automatically. If you power-off in this mode, the IP address
setting will be cleared.
Manual The address will be set manually. In this mode, the IP address setting will be saved
even if you power-off.
Range
001.000.000.001–223.255.255.254
Port No.:
Min:3.4V->4.2V
å
Explanation
å 6 .Network Setup
IP Address Mode
IP Address Mode
Explanation
IP Address
192.168.000.002
å
Explanation
Specifies the ACD1's IP address.
MAC Address
00A0DE251500
3
DHCP
å