Download Print this page

Using Several Handsets; Internal Consultation Calls; Accepting/Rejecting Call Waiting During An Internal Call; Using A Handset As A Room Monitor - Siemens Gigaset SL1 colour Manual

Hide thumbs


Using several handsets

Using several handsets
Transferring a call to another handset
u (open internal list); select s (a particular handset or Call All);
The internal user answers: press a ('end call' key).
If he does not answer or is busy, the call will come back to you automatically (Recall
appears in the display).

Internal consultation calls

You can make an internal call while an external call is in progress.
u (open internal list); s (select handset),
To end the call: press the display key

Accepting/rejecting call waiting during an internal call

If you get an external call while conducting an internal call, you will hear the call
waiting tone (short tone). Press the display key
The rejected call waiting tone can still be heard at other registered handsets.

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set
noise level in the room is reached. The room monitor remains activated on the handset
even after you hang up.
The handset should be between 1 and 2 metres away from the baby.
The microphone must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the
baby are indicated without a ring tone, they are just shown on the display. The display
and the key pad are not illuminated.
When entering an external phone number, make sure that the line to which you want
the room monitor to be transferred is not blocked by an activated answering machine.
If you redirect your room monitor to an external number, then you should tell that
number's owner.
The room monitor's call to an external phone number stops after about 90 seconds,
to an internal number (handset) it stops after about 180 seconds (depending on the
Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
The room monitor function severely curtails the handset's operating time.
If necessary you should place the handset which is near the baby in the
charger to ensure that the battery does not run down.
The room monitor function can also be used in Walk and Talk mode.
(back to outside caller).



  Also See for Siemens Gigaset SL1 colour