Linking Internal Callers To An External Call - Siemens Gigaset S455 User Manual

The external call is transferred to the other
handset.
If the internal participant does not answer
or is busy, press the display key
return to the external call.
When diverting a call you can also press
the end call key a before the internal
participant lifts the receiver.
Then, if the internal participant does not
answer or is busy, the call will automati-
cally return to you (the display will show
Recall).
Internal consultation calls
When you are speaking to an external
participant you can simultaneously call an
internal participant for consultation.
u
Open list of handsets.
The external caller hears the
wait melody if activated (see
page 46).
s
Select handset and press
Ending an enquiry call
Press the display key.
§End§
You are reconnected with the external
caller.
Accepting/rejecting call waiting
If you get an external call while conduct-
ing an internal call, you will hear the call
waiting tone (short tone). The caller's
number will appear in the display if phone
number identification is enabled.
Ending an internal call, accepting an
external call
Press the display key.
§Accept§
The internal call is ended. You are con-
nected to the external caller.
Rejecting external call
Press the display key.
§Reject§
The call waiting tone is turned off. You
remain connected with the internal partic-
ipant. The ringtone can still be heard at
other registered handsets.
Linking internal callers to
, to
§End§
an external call
Important: The
be activated.
You are conducting an external call. An
internal caller can listen in on this call and
take part in the conversation. All the par-
ticipants are made aware of the 'listening-
in' by a signal tone.
Activating/deactivating internal
listening in
v
a
Internal listening in
.
§OK§
The line is engaged with an external call.
Your screen will display information to
that effect You want to listen in to the
existing external call.
c
You are linked into the call. All participants
hear a signal tone. During this time, this
handset will not display any information
or messages and no selection can be made
from this handset.
Ending listening in
a
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has 'lis-
tened-in' remains connected to the exter-
nal caller.
Using several handsets
Listening In
¢ ¢ ¢
Ð
Base Add. Features
¢
Listening In
Press and hold (idle status).
Press and hold the talk key.
Press the end call key.
function must
39