Removal and Replacement
5.3 XMI Chassis Components
The following sections contain the removal and replacement procedures for the
components that are unique to the XMI chassis in the rackmount DEC 7000 AXP
and VAX 7000 systems.
5.3.1 Front Bezel
Perform the following procedure to remove the front bezel from the XMI chassis:
1. Grasp the front bezel on each side.
2. Pull straight out until the bezel unsnaps from the catches (see Figure 5–13).
To replace the front bezel, push it onto the front of the chassis until it snaps into
place.
5–24 Removal and Replacement