2.5 Installing the XMI Chassis
The following sections discuss the installation of the XMI (BA601-AC) chassis in
a standard RETMA 48.26 cm (19 in.) wide equipment cabinet such as Digital's
H9702 cabinet. The first XMI chassis is installed in the space above the LSB
chassis. Any other XMI chassis that are to be installed should be installed in
the space above the previously installed XMI chassis. Open the rear door of the
cabinet before installing the chassis.
Before attempting to install the equipment into a cabinet or rack,
ensure that the cabinet is stable and that all provided stabilizing
features have been activated. The stabilizing features for the rack
or cabinet are configuration dependent.
WARNING
Installation
Installation 2–13