Installing The Lsb Chassis On The Slides - DEC Rackmount 7000 AXP Installation And Owner's Manual

Installation
Figure 2–5 Installing the LSB Chassis on the Slides
7. Release the slide locking levers on both slides and carefully slide the LSB
chassis into the cabinet. Ensure that the chassis is level, can clear all other
equipment in the cabinet, and that the slides operate smoothly.
8. Secure the chassis to the equipment rails by tightening the four screws into
the bar nuts and U-nuts that were placed on the front RETMA rails during
installation of the slides.
9. Replace the front bezel on the LSB chassis by grasping both sides of the bezel
and pushing it onto the front of the chassis.
2–12 Installation
Chassis
Mounting
Holes
MK−2339−12