Restart Switch; Xmi Control Panel Status Led Indicators - DEC Rackmount 7000 AXP Installation And Owner's Manual

Introduction
Table 1–6 Restart Switch
Upper Keyswitch Lower Keyswitch
Enable Update or Halt
Enable Auto Start
Standby or "O" OFF Any position
The XMI control panel also includes three status LED indicators. Table 1–7 lists
these LEDs and describes their functions.
Table 1–7 XMI Control Panel Status LED Indicators
Symbol Name
Run
Battery
Fault
1–12 Introduction
Restart Switch Function
Runs self-test, then halts.
Runs self-test, then reboots the operating
system.
Does not function.
State/Color Indication
On (Green) System is executing operating system
instructions on at least one processor.
Off System is either in console mode or is
turned off.
NA (Green) (This function is not implemented on
the rackmount DEC 7000 AXP and
VAX 7000 systems.)
On (Red) Self-test is in progress. If light does
not go off, system has a hardware
fault.
Off Self-test has completed successfully, or
the system is turned off.