Installing The Lsb Chassis - DEC Rackmount 7000 AXP Installation And Owner's Manual

2.4 Installing the LSB Chassis

The following sections discuss the installation of the LSB (BA700-AA) chassis in
a standard RETMA 48.26 cm (19 in.) wide equipment cabinet such as Digital's
H9702 cabinet. The LSB chassis is installed in the bottom space of the equipment
cabinet. The LSB chassis and the XMI chassis together occupy 88.9 vertical
centimeters (35 vertical inches) of space in the equipment cabinet. Open the rear
door of the cabinet before installing the chassis.
Before attempting to install the equipment into a cabinet or rack,
ensure that the cabinet is stable and that all provided stabilizing
features have been activated. The stabilizing features for the rack
or cabinet are configuration dependent.
The following tools are required for installing the LSB and XMI chassis:
• Medium Phillips screwdriver
• Small Phillips screwdriver
• Small flat-blade screwdriver
• Adjustable wrench
WARNING
Installation
Installation 2–5