Media Sizes; Media Margins; Other Plotter Features; Upgrading A Designjet 200 - HP DesignJet 200 Service Manual

Media Sizes

The plotters handle only sheet media, not roll media. Supported standard sizes are as follows:
ANSI
ISO
Metric Oversize
Architectural
JIS
The plotters handle media that
does not exceed the following
maxima and minima:

Media Margins

The media margins define the
real available plotting area on
the media:

Other Plotter Features

D Automatic media edge sensing
D Automatic cartridge alignment, testing and servicing
D Built in diagnostic and demonstration plots

Upgrading a DesignJet 200

Users can order an upgrade kit to upgrade a DesignJet 200 to a DesignJet 220. The kit
should be installed by HP qualified service personnel only.
1 4 Product Information
D/A1-size plotters
(C3180A and C3187A)
A, B, C, D
A4, A3, A2, A1
A2, A1
C, D
A4, A3, A2, A1
B4, B3, B2
C3180A
C3187A
plotters
210 – 625 mm
8.3 – 24.6 in
portrait
5 mm
E/A0-size plotters
(C3181A and C3188A)
A, B, C, D, E
A4, A3, A2, A1, A0
A2, A1, A0
C, D, E, E1
A4, A3, A2, A1, A0
B4, B3, B2, B1, B0
C3181A
C3188A
plotters
210 – 917 mm
8.3 – 36.1 in
5 mm landscape
5 mm
17 mm = 0.67 in
5 mm = 0.2 in
All measurements +/– 2mm (0.08 in)
C3187 90000
5 mm