Removing The Main Pca - HP DesignJet 200 Service Manual

Removing the Main PCA

1 Remove the electronics enclosure
cover D page 6 5.
3 Remove the two screws from the parallel
connector.
Pozidriv PZ1
C3187 90000
2 Remove the two screws from the serial
(RS 232 C) connector.
3/16 inch
4 D/A1 size plotters only: Open the
flexible, DANGER HIGH VOLTAGE,"
insulation cover.
Flex the cover to open it Do not detach the
cover from the plotter
Removal and Replacement 6 9