Power Switch - HP Pro 3330 Microtower Maintenance & Service Manual

Power Switch

Description
Power switch/LED assembly
The power switch is attached to the front of the chassis using tabs (no screws). Its cable routes
through metal tabs in the chassis floor. The power switch cable connects to the front USB assembly
cable.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Rotate the drive cage to its upright position.
5. From the inside of the computer, remove the power switch cable from the tabs on the computer
floor.
Figure 8-23
(Access Panel on page
(Front Bezel on page
Removing the power switch cable
(Preparation for Disassembly on page
102).
104).
Spare part number
656984-001
101).
Power Switch 123