General Information; Introduction; Package Items - SignWarehouse.com enduraCUT 2 User Manual

Chapter 1: General Information
1.1

Introduction

EnduraCUT 2 cutting plotters have been designed to produce computer-generated images
on sheets or rolls of vinyl media.
This manual covers the Vinyl Express EnduraCUT 2 series cutting plotter:
acceptable media widths range from 2.76"(70mm) ~ 28.3"(719mm)
1.2

Package Items

The EnduraCUT 2 is shipped with the items listed below. Please check your package careful-
ly. If you find any item missing, please consult SignWarehouse customer service for further
assistance.
Standard Item
1. Cutting Plotter
2. Stand Set ( Optional )
• 1 Left side vertical stand
• 1 Right side vertical stand
• 1 Support for left side
• 1 Support for right side
• 1 Stand Beam
• 2 Bottom Stands with wheels
• 2 Sliding brackets for paper takeup
• 1 Hex Wrench (M5) 4
• 28 Socket flat head screws(M6*12L)
• 1 Installation Guide
3. Accessories
• 1 AC power Cord
• 1 USB Printer cable
• 1 Serial cable
• 1 Blade Holder Assembly (Installed in tool carriage of the cutting plotter )
• 1 Blade (Installed in Blade Holder)
• 1 Safety Blade
• 1 Cutting Pad
• 1 Pair of Tweezers
• 1 Roller Tray
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
5
User Manual
Quantity
1
1