Cleaning The Pinch Rollers - SignWarehouse.com enduraCUT 2 User Manual

5.3: Cleaning the Pinch Rollers

If the pinch rollers need a thorough cleaning, use a lint-free cloth or cotton swab to wipe away
the accumulated dust from the rubber portion of the pinch rollers. To prevent the pinch rollers
from rotating while cleaning, use your finger to hold the pinch rollers in place.
To remove embedded contaminants or persistent dust, use a lint-free cloth or cotton swab
moistened with rubbing alcohol.
Note:
The daily maintenance of your cutting plotter is very important. Be sure
to clean up the grid drum and pinch rollers regularly for better cutting
accuracy and output quality.
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
37
User Manual