System Administrator; Log Out - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

C T
HAPTER ITLE

System Administrator

This page is used to configure the System Administrator set-
tings.
To open System Administrator page, click Maintenance > Sys-
tem Administrator from the main menu. A sample screenshot
of System Administrator page is shown in the screenshot
below.
Figure 4-51. System Administrator
The various fields of System Administrator page are given
below. Username: Username of System
Administrator is a read only field.
Table 4-44: System Administrator Page
I
TEM
User Access To enable user access for system administrator.
D
ESCRIPTION
4-65
W G
EB RAPHICAL
Table 4-44: System Administrator Page (Continued)
I
TEM
To change the user's password.
Note:
Password, Confirm Password:

Password must be at least 8 characters
Change Password 
long.
White space is not allowed.

This field will not allow more than 64 charac-

ters.
Save This field will not allow more than 64 characters.
Reset To reset the modified changes.
Procedure:
1. To enable User Access, check the Enable option.
2. Enable Change Password option to change the user
password. This action enables the password fields.
3. Enter the new password in the Password field.
4. Re-enter the password in the Confirm Password field.
5. Click Save to save the changes.
6. Click Reset to reset the changes.

Log Out

To log out of the MegaRAC GUI, click the logout link on the top
right corner of the screen.
U I (GUI) ESMS
SER NTERFACE FOR
D
ESCRIPTION