QUANTA STRATOS S210 Series S210-X12RS Technical Manual page 207

C T
HAPTER ITLE
this ratio of pre-configured entries to run-time configurable
entries can be reallocated if necessary.
Figure 4-24. PEF Management – Event Filter
The fields of PEF Management – Event Filter Tab are explained
below.
This page contains the list of configured PEF's.
Table 4-24: PET Management - Event Filter
I
TEM
This field displays the ID for the newly
PEF ID
configured PEF entry (read-only).
Filter configuration Check box to enable the PEF settings.
Check box to enable PEF Alert action. This is a
Event Filter Action
mandatory field.
D
ESCRIPTION
4-34
W G
EB RAPHICAL
Table 4-24: PET Management - Event Filter (Continued)
I
TEM
To choose any one of the Event severity from the
Event Severity
list.
To choose the particular sensor from the sensor
Sensor Name
list.
To add the new event filter entry and return to
Add
Event filter list.
Modify To modify the existing entries.
To cancel the modification and return to Event
Cancel
filter list.
Procedure:
1. Click the Event Filter Tab to configure the event filters in
the available slots
2. To Add an Event Filter entry, select a free slot and click
Add to open the Add event Filter entry Page. A sample
U I (GUI) ESMS
SER NTERFACE FOR
D
ESCRIPTION