6.3
Setting the LCD display
The LCD can be controlled by knocking on the display to define the display language, contrast, auto-test and
frequency.
When the LCD is dark
Knock to make it becomes bright. The display remain visible for 30 seconds for 1-5 information
When the LCD is Bright
Knock to make it display next information (all range).
Setting the language
Knock to make the display bright→ knock to "set language"→ double knock to enter "language: English"→
knock to select the language you need and wait until the display becomes dark.
Setting the display contrast
Knock to make the display bright → knock to "set LCD contrast"→ double knock to enter"LCD contrast 2"→
knock to select the contrast setting you need and wait until the display becomes dark.
Setting the communication address
Knock to make the display bright → knock to "COM Address:xx" → double knock to change the address model
→ clock to set the address.
Setting the net model
Knock to make the display bright→knock to "Net Model: xx" → double knock to enter "Net Model: xx"→ knock
to select the Net model you need and wait until the display becomes dark.
Auto test
Knock to make the display bright → knock to "Enable Auto test"→ double knock to enter "Waiting to start"→
knock to start auto test and wait for the test result.
18
Power
:
2016.2W
Net
Model:
2
Power
:
2016.2W
Net
Model:
3
Power
:
2016.2W
Net
Model:
4
RADIUS Home