Table of Contents
Advertisement
IRQs Activities
Press Enter to enter the sub-menu and the following screen appears:
Primary INTR
On
Selecting
if activity is detected from any enabled IRQ channels. Settings:
IRQ3~IRQ15
Enables or disables the monitoring of the specified IRQ line. If set to
Enabled
, the activity of the specified IRQ line will prevent the system
from entering power saving modes or awaken it from power saving
modes. These fields are only available if Primary INTR is on. Settings:
Enabled
and
Note:
IRQ (Interrupt Request) lines are system resources allocated to I/O
devices. When an I/O device needs to gain attention of the operating
system, it signals this by causing an IRQ to occur. After receiving the
signal, when the operating system is ready, the system will interrupt itself
and perform the service required by the IO device.
will cause the system to wake up from power saving modes
Disabled
47
BIOS Setup
Off, On
Advertisement
Table of Contents
