Chapter 2
M
M
EMORY
ODULE
The VIA EPIA-PD Mini-ITX mainboard provides one DIMM slot for DDR266
memory modules.
DDR Module Installation Procedures
1.
Push the white retaining latches at either end of the DIMM slot outwards.
2.
Align the DDR module with the corresponding notches on the DIMM slot.
The modules will only fit if placed in the correct position.
3.
With both hands, press the DDR module down into the DIMM slot so that
the white retaining latches rotate up and secure the module in place
(see picture below).
I
NSTALLATION
CLE266
10