Table of Contents
Advertisement
SuperIO Device
Press Enter to enter the sub-menu and the following screen appears:
Onboard Serial Port 1/2/3/4
Set the base I/O port address and IRQ for the onboard serial port A /
serial port B. Selecting
correct base I/O port address. Settings:
Port
1
Disabled
2
Disabled
3
Disabled
4
Disabled
Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7
Settings:
Parallel Port Mode
Set the parallel port mode. To operate the onboard parallel port as
Standard Parallel Port, choose
in the EPP mode, choose
port will operate in ECP mode. Choosing
onboard parallel port to support both the ECP and EPP modes
simultaneously. Settings:
Auto
allows BIOS to automatically determine the
3F8/IRQ4
2F8/IRQ3
3F8/IRQ4
2F8/IRQ3
3F8/IRQ5
2F8/IRQ10
3F8/IRQ5
2F8/IRQ10
SPP
. To operate the onboard parallel port
EPP
. By choosing
SPP, EPP, ECP, ECP + EPP
41
Settings
3E8/IRQ4
3E8/IRQ4
3E8/IRQ5
3E8/IRQ5
ECP
, the onboard parallel
ECP + EPP
BIOS Setup
2E8/IRQ3
Auto
2E8/IRQ3
Auto
2E8/IRQ10
---
2E8/IRQ10
---
will allow the
Advertisement
Table of Contents
