Chapter 3
Typematic Delay (Msec)
When Typematic Rate Setting is enabled, this item allows you to select the
delay between when the key was first pressed and when the acceleration
begins. Settings:
Security Option
If you have set a password, select whether the password is required every
time the System boots, or only when you enter Setup. Settings are described
below:
Setup
System
Display Full Screen Logo
Show full screen logo during BIOS bootup process. Settings:
Disabled
Show Summary Information
Show the summary information during the BIOS boot process. Settings:
Enabled
Disabled
and
Display Small Logo
Show small energy star logo during BIOS boot up process. Settings:
Disabled
and
250, 500, 750
and
The password prompt appears only when end users try
to run Setup.
A password prompt appears every time when the
computer is powered on or when end users try to run
Setup.
1000
36
Enabled
and
Enabled