EPIA-M700 User's Manual
Memory Module Installation
Memory Slot: DDR2 DIMM
The VIA EPIA-M700 mainboard provide one 240-DIMM slot for DDR2
667/533 SDRAM memory modules and supports memory sizes up to 2GB.
DDR2 SDRAM Module Installation Procedures
Locate the DIMM slot in the motherboard.
•
Unlock a DIMM slot by pressing the retaining clips outward.
•
Align a DIMM on the socket such that the notch on the DIMM
•
matches the break on the slot.
Firmly insert the DIMM into the slot until the retaining clips
•
snap back in place and the DIMM is properly seated.
Available DDR2 SDRAM Configurations
Refer to the table below for available DDR2 SDRAM configurations on
the mainboard.
Slot
Module Size
DIMM1
64MB, 128MB, 256MB, 512MB, 1GB, 2GB
Maximum supported system memory
Total
64MB - 2GB
64MB - 2GB
9