Table of Contents
Advertisement
Chapter 3
M
M
EMORY
ODULE
The VIA EPIA-LT Mini-ITX mainboard provides one 240-pin DIMM slot for
DDR2 533 SDRAM memory modules and supports the memory size up to 1GB.
DIMM
DDR SDRAM Module Installation Procedures
•
Locate the DIMM slot in the motherboard.
•
Unlock a DIMM slot by pressing the retaining clips outward.
•
Align a DIMM on the socket such that the notch on the DIMM
matches the break on the slot.
•
Firmly insert the DIMM into the slot until the retaining clips snap
back in place and the DIMM is properly seated.
Available DDR SDRAM Configurations
Refer to the table below for available DDR SDRAM configurations on the
mainboard.
Slot
DIMM
Maximum supported system memory
Note:
Only supports 1GB SDRAM with 64M x 8bits x16 configuration.
I
NSTALLATION
Module Size
64MB, 128MB, 256MB, 512MB, 1GB
10
Total
64MB-1GB
64MB-1GB
Advertisement
Table of Contents
