Setting Dialup Network - Docomo Style series F-10C Instruction Manual

2
Enter notify/not notify of caller ID in the format "AT
<n> : 0-2
0 : Connect directly (Default)
1 : Connect prefixing 184 (Not notify)
2 : Connect prefixing 186 (Notify)
If nothing is displayed even when AT command is
entered, enter ATE1 and press
3
Confirm that "OK" is displayed and click "
4
When confirming disconnection, click "
click "
❖
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
The Show/Hide of caller ID when both of the
as shown below.
Setting made by
Dialup network
setting (<cid>=3)
99 3#
184 99 3#
186 99 3#

Setting dialup network

In this manual, the description takes the case of IP connection to mopera U via packet communication for
example.
When connecting to mopera U or mopera via packet communication, enter the following number in the
phone number field.
mopera U (PPP connection) :
mopera U (IP connection) :
128K communication (PPP connection) :
mopera (PPP connection) :
When connecting to mopera U or mopera via 64K data communication, enter the following number in
the phone number field to connect to.
mopera U : 8701
mopera : 9601
.
(End HyperTerminal)".
(No)".
DGPIR
command No setting
Caller ID is sent
99 2#
99 3#
99
99 1#
(Yes)" When confirming saving,
DGPIR command and dialup network settings are set is
Caller ID is not sent
Caller ID is not sent
Caller ID is not sent
Caller ID is sent
4#
18
DGPIR=<n>"
(File)" Click "
Caller ID is sent
Caller ID is sent
.