Installing Foma Communication Configuration File (Driver) - Docomo Style series F-10C Instruction Manual

Installing FOMA communication configuration file
(driver)
To make data communication by connecting FOMA terminal and a PC with USB cable, FOMA
communication configuration file (driver) is required. Install the file before connecting FOMA
terminal for the first time to the PC.
Before operating, refer to "Precautions for installation/uninstallation".
For without using USB cable, installing FOMA communication configuration file (driver) is not required.
Do not connect FOMA terminal until a message that instructs you to connect FOMA terminal to a PC
appears in Step 5.
1
Download FOMA communication configuration file (driver) from NTT
DOCOMO website.
http://www.nttdocomo.co.jp/support/utilization/application/foma/com_set/driver/index.html
Before downloading, check model name of FOMA terminal.
2
Double-click the downloaded file
the file which your PC is applied to.
3
In the window displayed, double-click the "F09Cst.exe" icon.
4
Click "
5
When a message indicating to connect FOMA terminal to the PC appears,
connect FOMA terminal to the PC.
Connect FOMA terminal while the power is ON.
6
On the Installation completion screen, click "OK".
Confirming FOMA communication configuration file (driver)
When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed.
<Example> Checking on Windows 7
1
(Start)
(System and security)"
(System)" category.
Under Windows Vista
Click (Start)
maintenance)"
Under Windows XP
a Click "
(Performance and maintenance)"
b On the "
"
(Start installation)".
"
"
"
" (Device manager)".
(Start)" "
"
(Property of system)" screen, click "
(Device manager)".
Double-click the unpacked folder
(Control panel)"
(Control panel)" "
(Control panel)"
(System)".
7
P5
"
(Device manager)" in the "
(System and
"
(Hardware)" tab
Select