Bar Code Reader - Docomo Style series F-10C Instruction Manual

Convenient tools
Schedule
Manage memos by Schedule or check a
downloaded i-schedule. (In Japanese only)
The view and function of schedule varies by the
schedule type. "Normal" in which you can manage
the schedules linking with i-concier or the memo
list is described here.
Registering note from the
schedule
uem [Submenu]ea New entry
a
b
Set required itemseI [Save]
Showing/Hiding hint : C [Hint ON/OFF]
You can select entry options from the hint
displayed in "
" (Where?)", "
whom?)", "
(Attachment)" field.
Point
Saving quickly from the stand-by display (Quick
schedule) : On the stand-by display, enter the date
and time to save a schedule (for 10:00 on June 24,
enter "06241000")eu
Checking a schedule
ueSelect a dateeSelect a note
a
(Seal)", " (When?)",
(With
(Share setting)", "
Convenient tools
Alarm
You can also set to activate 1Seg after sounding
alarm.
a u (1 sec. or more)eSelect a number
eh to switch the screen to set
required itemseC [Set]
Point
In "Snooze (Snz)", set the sound intervals for 30
minutes.
It stops or starts snooze with no operations for
approximately 1 minute, by pressing a key other than
f, T and D or double-tapping when the
FOMA terminal is closed.
Convenient tools

Bar code reader

You can read and use information of JAN code,
QR code, NW7 code, and CODE39 code.
a mef Toolea Bar code
Move the out-camera over a bar code
When scanning is completed, a confirmation
sound is heard and the scanned data appears.
Point
When a bar code is hard to read, press n or g to
use manual auto focus, or press C to switch to
shutter mode, adjust the distance between the code
and camera, angle, or direction.
readere
69