Docomo Style series F-10C Instruction Manual page 122

3
Enter a fictional phone number (such as "0") for "
Select "
" (Area code)" differs depending on the
PC environment. The code does not relate to
Dialup connection (APN) setup. So no need to
change.
Set as follows at "
field.
For USB cable connection : Select "FOMA F09C".
For Bluetooth connection : Select "
Bluetooth
modem via Bluetooth link you use)" or
"Bluetooth
(Bluetooth modem provided by
Bluetooth device manufacturer)".
4
Click "
5
Enter the dialup connection (APN) in the format "AT+CGDCONT =<cid>,
"<PDP_TYPE>", "<APN>""
<cid> : Enter any number between 5-10.
<PDP_TYPE> : IP or PPP
<APN> : Dialup connection (APN)
+CGDCONT command
command"
If nothing is displayed even when AT command is
entered, enter ATE1 and press
6
Confirm that "OK" is displayed and click "
7
When confirming disconnection, click "
click "
Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
If "Not notify" is set when using mopera U or mopera, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
(Connection method)"
(Connection method)"
(Standard
(Cancel)" on the "
P34 "Supplement to AT
.
(End HyperTerminal)".
(No)".
Click "OK".
Bluetooth
(Connect)" screen.
(Yes)" When confirming saving,
17
(Phone number)"
(File)" Click "