Caller Id Notification - Docomo Style series F-10C Instruction Manual

Before Using
Power ON - Default setting
Initial setting is an operation when FOMA terminal
is turned ON for the first time.
a f (2 sec. or more)
The Initial setting screen appears.
b
Set required itemseC [Complete]
If you exit without setting Change security
code and Request permit/deny., Initial setting
screen reappears when the power is turned
ON the next time.
c
On a confirmation screen of software
update function, g
The stand-by display appears.
Point
If no operation is performed, the display light is
automatically turned off according to the settings in
Light time-out or eco mode setting. The display light
turns on again if there is any operation or incoming
call.
The battery usage state is automatically recorded
while using the FOMA terminal. The record is used
only for repair diagnosis.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehib
Changing screen display to English :
mehddeSelect "English"
Before Using

Caller ID notification

Set whether to notify your phone number (caller
ID) to the other party's terminal when making a
voice call. Caller ID notification is set to "ON" at the
time of subscription.
a meg TEL functioned Dial/
Receive call settingec Caller ID
notificationeb Settingea ON
b OFF
Point
If you hear an announcement of requesting caller ID
when making a call, set Caller ID notification or add
prefix "186" to the phone number to call again.
Before Using
Checking Profile
Check a model name or own phone number.
For details of checking/changing a mail address,
refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
me0 Profile
a
User information screen appears.
Point
Editing the profile : On User information screen,
CeAuthenticateeSet required itemseC
Checking a phone number during a call : se0
or
27