Delete All Data; Unregistered Caller; Incoming Call Restriction - Docomo Style series F-10C Instruction Manual

Lock/Security

Incoming call restriction

Call rejection setting for each
reason to hide Caller ID
For each reason for hiding caller ID, you can set a
receiving operation.
a meg TEL functioned Dial/
Receive call settingei Call rejection
settingec Anonymous - e
UnavailableeAuthenticateeSet
required itemseC [Set]
Point
The reasons for hiding caller ID are as follows:
Anonymous : a call with hiding caller ID set
Payphone : a call from public payphone, etc.
Unavailable : a call unavailable to notify caller ID
such as an overseas call or call from land-line
phone using call forwarding service, etc.

Unregistered caller

You can reject calls from phone numbers not
saved in phonebook.
This function is available for calls showing caller
ID. For calls hiding caller ID, receiving operation is
performed according to the Call rejection setting
for each reason. It is recommended that you use
both Caller ID request and Call rejection setting for
each reason.
a meg TEL functioned Dial/
Receive call settingei Call rejection
settingea Unregistered
Authenticateea ON
callere
b OFF
or
Lock/Security
Resetting to default
Reset
You can restore functions in
menu list to the default settings.
a meh Settingei Other
d ReseteAuthenticateeSelect an
item to reseteC [Reset]e"Yes"

Delete all data

You can delete data saved in FOMA terminal, and
restore the each function's settings to the default.
a meh Settingei Other
c Delete all
dataeAuthenticatee
"Yes"
All data is deleted while restarting. Do not turn
power off until the stand-by display is
displayed.
Point
Even after all data is deleted, the data registered by
default is not deleted.
red characters on the
P82
settinge
settinge
41